 Product
Description
The complete line of the Environmental Compliance Systems® are
designed to
make complying to the environmental restrictions of most pressure washing
applications
simple and affordable.
With the proper in field training by your
certified and full service distributor you can
be up and operational in just minutes.
The ECS is designed to be used as a portable
or stationary treatment system that
guarantee’s results with ease of service
while minimizing disposal cost.
This automatic and easy to use zero-discharge
system was uniquely designed to keep business’s
operating without expensive filter cost, down time
and additional man power. The ECS line of equipment can with ease fit into
pick-up trucks, vans or on to trailers.
Some of the washing applications that require zero discharge regulations
to storm drain are parking structures,
sidewalks, parking lots, loading docks, sports stadiums, convenience stores,
gas stations, retail store fronts, fast
food restaurants and drive through, spills and work sight accident clean
ups and auto detailing to name a few.
ECS requires that all operating personnel are properly instructed on
implementing procedural guidelines established
by the E.P.A. known as BMP (best management practices).
Every washing application starts with sizing the right cleaning system
for the application and the accessories
needed to do the job correctly.
 Once all the educational criteria have been met your ECS representative
can help design or configure the containment
method best suited for your application. Such things as portable wash
pads, storm drain covers and oil absorbent
burms to name a few.
The Environmental Compliance System will be sized to the gallonage of
treatment required. The processed water
will be pre-filtered through the patent pending multi-tier suction head
and optional strainer drum before entering the
ECS. The treatment system will then be fed the wastewater effluent via
transfer pump or a vacuum system with auto
pump out. The pre-filtered waste stream will enter the easiest and simplest
to maintain system ever designed for
water treatment.
The wash water enters the Phase I filtration chamber through a clear
molded-glass cover. The lid is clear for ease of
inspecting the filtration process. The waste stream flows through inline
replaceable filters. 3 - vertical 100 micron screen filters and 8 polymer
impregnated
micro-fiber filters removing most solids down to 5 micron and
99.9% of free oil and petroleum related products.
The ECS Phase II filtration continues with the patent pending Perking ®
filtration process trapping any remaining fine solids<
before the Phase III filtration which the waste
stream is pressurized through polymer impregnated
polishing filters of 50, 20 and 5 micron
which are monitored by pressure differential
gauges making it easy to identify when filters
need to be cleaned or replaced.
Containment Mats
Made right here in New England, the containment mats are ideal for capturing and containing boat and vehicle power wash water, preventing the run off from entering water supplies, storm drains, rivers, ponds, the ocean or anywhere an enviromental issue may be of concern. There are many in use all over the East Coast. All are custom made to fit your boatyard's needs!
Specs:
- 4' x4' "drive over foam berms
- simple to set up, no tubes to insert and air to blow up
- just lay it out and start washing
- welded seams for maximum containment
- manufactured from durable vinly coated polyester
- avalable in: standard duty 18 oz or heavy duty 22 oz
- the only mat manufactured offering:
40 oz - Ideal for extrem duty applications!
For more information call
877-871-8270
ken@pressurewasherwarehouse.net
|
